Low Temperature Silver Brazing Alloys (Tungsten Carbide Tipped Tools)

MBPL RAJAT 50 is a general purpose alloy with excellent mechanical properties. The nickel improves wetting on carbides and produces a less free flowing alloy. This gives a thicker braze joint, better able to accomodate higher stresses.

MBPL RAJAT 49 MnNi is a general purpose alloy with excellent mechanical properties. The nickel improves wetting on carbides and produces a less free flowing alloy. This gives a thicker braze joint, better able to accommodate higher stresses.

MBPL RAJAT 49A MnNi is for brazing tungsten carbide and substances which are difficult to wet.

MBPL RAJAT 40 is an economical alloy with good wetting characteristics. Used extensively for carbide tip brazing, but its application is restricted by its relatively high melting points.

MBPL RAJAT 405N is used for tungsten carbide and stainless steels.

MBPL RAJAT 27 is an economical alloy with good wetting characteristics, used preferably for brazing hard metals to steel mountings. Addition of Nickel and Manganese improves wettability on tungsten and molybdenum materials. Its application is restricted by its relatively high melting points.